A study on the bending of a trough-shaped profile using a roller and PUR pad Online publication date: Wed, 10-Mar-2010
by Zhubin He, Bugang Teng, Shijian Yuan, Z.R. Wang
International Journal of Materials and Product Technology (IJMPT), Vol. 38, No. 2/3, 2010
Abstract: In bending with PUR pad, profile with different curvature radius can be manufactured. Experiment of trough-shaped profile was carried out to investigate the effect of section shape, penetration depth, roller radius and PUR pad thickness. Results show that both the position of neutral surface and section moment of bending have significant effect on curvature radius. Profile with bigger section moment of bending is difficult to bend. Curvature radius of bent profile decrease sharply when penetration depth increase. Change of roller radius has similar effect as the position of neutral surface. PUR pad thickness has big effect under small penetration depth.
Online publication date: Wed, 10-Mar-2010
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Materials and Product Technology (IJMPT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email email@example.com