The full text of this article:

Rapid Cloning (RC): a new reproduction method for complex castings
by Heinz Steinbeiss, Timo Hanss
International Journal of Manufacturing Technology and Management (IJMTM), Vol. 6, No. 6, 2004
Abstract: Modern production systems produce serial parts on the basis of 3D CAD data. With the reproduction of spare parts often come different requirements: missing 3D CAD models and low quantities make it difficult to produce economically and with flexible production units. The possibility of generating 3D CAD data of an existing original part with the help of conventional measuring systems is practically possible only with simple geometries. Complex geometries such as cast parts with undercut and inner contours cannot be collected non-destructively. In order to present a reproduction process that can also handle complex cast parts, the process of Rapid Cloning was developed and successfully tested with a historical aluminium cylinder head. The inner and outer contours of the complex casting were first obtained using industrial computer tomography (CT), a non-destructive measurement. The 3D data obtained was then utilised in subsequent steps, such as the process simulation and the design of the core package. Each designed core was then produced using a Selective Laser Sintering (SLS) Rapid Prototyping (RP) system. This process allows to receive a fully functional clone of the cylinder head within a few weeks. This development in rapid reproduction is applicable to most existing castings.

is only available to individual subscribers or to users at subscribing institutions.

Pay per view: If you are not a Subscriber and you just want to read the full contents of this article, please click here to purchase online access to the full-text of this article. Please allow 3 days + mailing time. Current price for article is Thirty Euros (€30)

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Technology and Management (IJMTM) journal, that have been redirected here, please check if you have a registered username/password subscription with Inderscience. If that is the case, please Login:

If you are not yet a Subscriber to International Journal of Manufacturing Technology and Management (IJMTM) journal, you can subscribe by following a few simple and quick steps. A subscription will give you complete access to all articles in the current issue, as well as to all articles in the previous three years, where applicable. Click here to subscribe.

Should you experience further difficulties or have any enquiries, please email subs@inderscience.com