The full text of this article:

Influence of process parameters on joining strength in microplasma arc welding
by Kueng-Hueng Tseng, Min Jou, Yun Chang, Her-Yueh Huang
International Journal of Manufacturing Technology and Management (IJMTM), Vol. 13, No. 2/3/4, 2008
Abstract: The objectives of this research are to investigate the effect of welding parameters on the weld quality and to develop guidelines for a selection of suitable parameter ranges for microplasma welding. A series of experiments was conducted to explore how changes of welding parameters affect the strength of the weld for the thin stainless steel most often used in the industry. The experiment results show that workpiece exposure height must be above a minimum limit in order to prevent undesired joining. The strength increases as the current increases, with fluctuations, but still in the sufficient range. The minimum sufficient current for quality welds increases, while the minimum sufficient heat input decreases, as the travel speed increases.

is only available to individual subscribers or to users at subscribing institutions.

Pay per view: If you are not a Subscriber and you just want to read the full contents of this article, please click here to purchase online access to the full-text of this article. Please allow 3 days + mailing time. Current price for article is Thirty Euros (€30)

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Manufacturing Technology and Management (IJMTM) journal, that have been redirected here, please check if you have a registered username/password subscription with Inderscience. If that is the case, please Login:

If you are not yet a Subscriber to International Journal of Manufacturing Technology and Management (IJMTM) journal, you can subscribe by following a few simple and quick steps. A subscription will give you complete access to all articles in the current issue, as well as to all articles in the previous three years, where applicable. Click here to subscribe.

Should you experience further difficulties or have any enquiries, please email subs@inderscience.com