Journal cover image

Browse issues


Vol. 57
Vol. 56
Vol. 55
Vol. 54
Vol. 53
Vol. 52
Vol. 51
Vol. 50
Vol. 49
Vol. 48
Vol. 47
Vol. 46
Vol. 45
Vol. 44
Vol. 43
Vol. 42
Vol. 41
Vol. 40
Vol. 39
Vol. 38
Vol. 37
Vol. 36
Vol. 35
Vol. 34
Vol. 33
Vol. 32
Vol. 31
Vol. 30
Vol. 29
Vol. 28
Vol. 27
Vol. 26
Vol. 25
Vol. 24
Vol. 23
Vol. 22
Vol. 21
Vol. 20
Vol. 19
Vol. 18
Vol. 17
Vol. 16
Vol. 15
Vol. 14
Vol. 13
Vol. 12
Vol. 11
Vol. 10
Vol. 9
Vol. 8
Vol. 7
Vol. 6
Vol. 5
Vol. 4
Vol. 3
Vol. 2
Vol. 1

International Journal of Materials and Product Technology

2018 Vol. 57 No. 1/2/3

 

PagesTitle and authors
1-19A comprehensive review of microstructure evolution during friction stir welding of aluminium to copper
Tanmoy Medhi; Barnik Saha Roy; Subhash Chandra Saha
DOI: 10.1504/IJMPT.2018.092925

20-42On the improved mechanical properties of nanoclay reinforced ABS composite for fused deposition modelling
Vishal Francis; Prashant K. Jain
DOI: 10.1504/IJMPT.2018.092927

43-53Determination of heat transfer coefficients for large scale steel forgings quenched in polymer solutions
Jesús Mario Luna-González; Edgar Ivan Saldana-Garza; Rafael David Mercado-Solis; Luis Adolfo Leduc-Lezama; Bradley P. Wynne
DOI: 10.1504/IJMPT.2018.092928

54-70Investigation into the effectiveness of cutting parameters on wear regions of the flank wear curve and associated cutting tool life improvement
Erhan Altan; Alper Uysal; Oguz Çaliskan
DOI: 10.1504/IJMPT.2018.092931

71-91Parametric optimisation in Nd-YAG laser cutting of thin Ti-6Al-4V super alloy sheet using evolutionary algorithms
A. Tamilarasan; D. Rajamani; Balasubramanian Esakki
DOI: 10.1504/IJMPT.2018.092933

92-108Theoretical and experimental investigation for micro-channel fabrication using low power CO2 laser
Arif Varsi; Abdul Hafiz Shaikh
DOI: 10.1504/IJMPT.2018.092934

109-131On the reduction of stress concentration factor in an infinite panel using different radial functionally graded materials
Vikas Goyat; Suresh Verma; Ramesh Kumar Garg
DOI: 10.1504/IJMPT.2018.092937

132-203A theoretical procedure for the stress state assessment of hyper-static crankshafts
Sergio Baragetti
DOI: 10.1504/IJMPT.2018.092919

204-229Experimental and mathematical evaluation of thermal and tensile properties of friction stir welded joint
Ratnesh Kumar; Bhabani Bora; Somnath Chattopadhyaya; Grzegorz Krolczyk; Sergej Hloch
DOI: 10.1504/IJMPT.2018.092920

230-239Wear characteristics of a combustion liner for power generation gas turbine
Ahmad Afiq Pauzi; Salmi Mohd. Yunus; Shuib Husin; Mariyam Jameelah Ghazali; Wan Fathul Hakim W. Zamri
DOI: 10.1504/IJMPT.2018.092939

240-255Multi-criteria selection of optimal welding parameter in MMAW hardfacing using MOORA method coupled with PCA
Abhijit Saha; Subhas Chandra Mondal
DOI: 10.1504/IJMPT.2018.092940