Title: Wavelet transformation method to allocate the DVB-T signals peaks

Authors: Omar R. Daoud; Qadri J. Hamarsheh; Ahlam A. Damati

Addresses: Department of Communications and Electronics Engineering, Philadelphia University, P.O. Box 1, Amman, 19392, Jordan ' Philadelphia University, P.O. Box 1, Amman, 19392, Jordan ' Philadelphia University, P.O. Box 1, Amman, 19392, Jordan

Abstract: Terrestrial digital video broadcasting (DVB-T) is considered as one of the main two popular broadcasting standards, which facilitates the transmission of digital television in handheld receivers. In this work, a comparison will be held on the physical layer level in order to enhance the wireless systems' performance. It is attained by exploiting a recently published work that is based on the wavelets entropy and a new proposition that is based on a special averaging technique. Those two propositions have been used to tackle the peak-to-average power ratio (PAPR) problem that is found in the used orthogonal frequency division multiplexing (OFDM) technique. This comparison asset from BER curves and CCDF curves in order to distinguish between them. A MATLAB simulation has been run in order to validate the numerical achieved results of the proposed work. At the same bandwidth occupancy of the speaker verification-based systems, the proposed technique shows additional enhancement in both of CCDF and BER curves. Moreover, it reduces the previously added complexity to the structure in the receiver side. An extra 25% reduction is achieved in the essence of PAPR and around 35% extra noise immunity.

Keywords: orthogonal frequency division multiplexing; OFDM; wavelet transform; peak-to-average power ratio; PAPR; entropy; clipping; selective mapping; SLM; signal processing.

DOI: 10.1504/IJDSSS.2017.087256

International Journal of Digital Signals and Smart Systems, 2017 Vol.1 No.1, pp.52 - 68

Received: 24 Dec 2016
Accepted: 19 Jan 2017

Published online: 11 Oct 2017 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article