Title: Design of voice-controlled wheelchair for quadriplegic patients

Authors: N. Jeevitha; P.U. Ilavarasi

Addresses: Department of Electronics and Instrumentation Engineering, Velammal Engineering College, Surapet, Chennai 600066, India ' Department of Electronics and Instrumentation Engineering, Velammal Engineering College, Surapet, Chennai 600066, India

Abstract: Powered wheelchairs with standard joysticks are difficult to control for 'Quadriplegics' patients. Wheelchair movement based on speaker's voice command will be helpful for the physically challenged people to mobilise themselves. So in this work a set of ten male and female voice commands (FORWARD, BACKWARD, LEFT, RIGHT and STOP) were recorded at different instances using a microphone and analysed how patient's voice differs from others by considering the parameters of amplitude, frequency and phase in the MATLAB software. FFT technique is used for feature extraction and smoothing the patient's voice signal. The processed signal is stored as a reference signal in LabVIEW for interfacing with hardware. The powered wheelchair movement depends on motor control and a drive system which consists of PIC 16F877A microcontroller and DC motor. Once the voice recognisation system identifies the voice command uttered by the patient, it is coded into digital signal and transferred to the PIC microcontroller which then controls the wheelchair accordingly.

Keywords: quadriplegics; FFT; PIC microcontroller; LabVIEW; DC motor.

DOI: 10.1504/IJBET.2017.085137

International Journal of Biomedical Engineering and Technology, 2017 Vol.24 No.3, pp.197 - 206

Received: 01 Feb 2016
Accepted: 16 May 2016
Published online: 13 Jul 2017 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article