Title: Thermal desorption for remediating PCB-contaminated soil

Authors: Zhonghua Zhao; Mingjiang Ni; Xiaodong Li; Alfons Buekens

Addresses: State Key Laboratory of Clean Energy Utilization, Institute for Thermal Power Engineering, Zhejiang University, Hangzhou 310027, China ' State Key Laboratory of Clean Energy Utilization, Institute for Thermal Power Engineering, Zhejiang University, Hangzhou 310027, China ' State Key Laboratory of Clean Energy Utilization, Institute for Thermal Power Engineering, Zhejiang University, Hangzhou 310027, China ' State Key Laboratory of Clean Energy Utilization, Institute for Thermal Power Engineering, Zhejiang University, Hangzhou 310027, China

Abstract: Thermal desorption techniques, destined for removing organic pollutants from contaminated soil, are reviewed with some emphasis on the removal of persistent organic pollutants (POPs) and other semi-volatiles. Treatment temperature and time are the two key factors determining removal efficiency (RE), which is also influenced by soil texture, total pressure, carrier gas composition and heating rate. Polychlorinated biphenyls (PCB) are selected as the most typical as well as widespread representative of semi-volatile POPs. In the presence of oxygen, PCB is converted into PCDF, leading to a rise in total TEQ (toxic equivalency quantity) even in case total PCB is diminishing. Thermal desorption and contaminant destruction and removal efficiency can be promoted by adding additives. The main mechanism of contaminants removal is desorption/evaporation, presumably accompanied by soil-catalysed dechlorination and decomposition. Thus, the soil treated is purified, yet the remaining contaminants are partly transferred to the gas phase. Dust extraction, condensation, and adsorption are frequently used to decrease the contaminant concentration in off-gas.

Keywords: soil remediation; thermal desorption; polychlorinated biphenyls; PCB; organic pollutants; removal efficiency; off-gas treatment; environmental pollution; soil contamination; toxic equivalency quantity; dust extraction; condensation; adsorption.

DOI: 10.1504/IJEP.2016.082113

International Journal of Environment and Pollution, 2016 Vol.60 No.1/2/3/4, pp.171 - 189

Received: 21 May 2016
Accepted: 19 Aug 2016

Published online: 07 Feb 2017 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article