Title: A study of process parameters for coal cutting under Indian environmental conditions using a hydro jet cutting system
Authors: Vinay Sharma, Surender Kumar
Addresses: Department of Production Engineering, Birla Institute of Technology, Mesra, Ranchi-835215, India. ' Department of Production Engineering, Birla Institute of Technology, Mesra, Ranchi-835215, India
Abstract: The application of hydro jet cutting system is increasing day by day in different fields; one of which is the cutting of rocks/coal. In traditional coal cutting one of the most difficult operations is to mechanise the cutting process. To overcome this problem, a most suitable system is a hydro jet cutting system where not only the system can be used for cutting but also the used water can be utilised for transportation of the coal from the site to the required destination in the form of slurry. In this paper, the author has tried to summarise the utility of the hydro jet cutting system and has given the findings of the experiments which have been done in the laboratory for Indian coal mines.
Keywords: coal cutting; hydro jet cutting; process parameters; India; non-traditional machining; advanced machining.
DOI: 10.1504/IJMTM.2005.006841
International Journal of Manufacturing Technology and Management, 2005 Vol.7 No.2/3/4, pp.391 - 403
Published online: 17 Apr 2005 *
Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article