Title: Effect of a separate heater structure for crystallisation to enable multilevel storage phase-change memory

Authors: Rosalena Irma Alip; Zulfakri Mohamad; You Yin; Sumio Hosaka

Addresses: Department of Advanced Science and Technology, Graduate School of Engineering, Gunma University, 1-5-1 Tenjin-cho, Kiryu, 376-8515, Japan; Faculty of Electrical Engineering, University Technology MARA, 40450 Shah Alam, Selangor, Malaysia ' Advanced Technology Research Center, Gunma University, 1-5-1 Tenjin-cho, Kiryu, 376-8515, Japan; Faculty of Electrical Engineering, University Technology MARA, 40450 Shah Alam, Selangor, Malaysia ' Department of Advanced Science and Technology, Graduate School of Engineering, Gunma University, 1-5-1 Tenjin-cho, Kiryu, 376-8515, Japan ' Department of Advanced Science and Technology, Graduate School of Engineering, Gunma University, 1-5-1 Tenjin-cho, Kiryu, 376-8515, Japan

Abstract: The effect of a separate-heater structure for crystallisation to enable multilevel storage for phase-change memory (PCM) device was investigated. This separate-heater is characterised by a constant resistant Rh. Existing power from the heater layer (TiSi3) can be well controlled, enabling crystallisation process for multilevel storage. Ge2Sb2Te5 (GST) was used as the memory layer. A simulation using COMSOL 3.2 was done to study the temperature distribution in the GST layer by applying an SET pulse ranging from 0 V to 3 V directly to the heater layer. The temperature of the GST layer increased gradually with increasing pulse amplitude, making multilevel storage possible due to the gradual resistance drop. For experimental work, when an increasing pulse amplitude at 100 ns pulse width was applied to the separate heater layer, resistance in the memory layer dropped gradually for more than three orders of magnitude. This indicates that the existing power from the separate heater was well controlled for efficient crystallisation in the memory layer, GST, enabling multilevel storage. The reproducibility of the device was also investigated by applying a RESET pulse directly to the GST layer. A PCM device with a separate-heater structure is stable and has the ability to reproduce more than two cycles.

Keywords: PCM; phase-change memory; separate heater; Joule heating; multilevel storage; crystallisation; non-volatile; heater structure; nanotechnology.

DOI: 10.1504/IJNT.2014.060556

International Journal of Nanotechnology, 2014 Vol.11 No.5/6/7/8, pp.389 - 395

Published online: 15 Dec 2014 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article