Title: The effect of hole shape on blade cooling effectiveness

Authors: Yufeng Yao, Jun Yao

Addresses: School of Aerospace and Aircraft Engineering, Faculty of Engineering, Kingston University, 104 Friars Avenue, Roehampton Vale, London SW15 3DW, UK. ' Mitsubishi Electric R&D Centre Europe B.V., 20 Frederick Sanger Road, The Surrey Research Park, Guildford, Surrey, GU2 7YD, UK

Abstract: The high temperature conditions under which turbine blades operate pose a constraint on their service lifetime. One industrial solution is to apply the film cooling and the cooling effectiveness is generally determined by flow conditions, cooling hole geometry shapes and orientations. In this study, a total of four cooling hole geometries are considered as a cylindrical hole, a cylindrical hole with an upstream ramp, a shaped diffuser, and a double console slot. In all cases, the hole centreline has an inclination angle of 35 degrees against the mainstream airflow. Simulation starts with a base model of cylindrical hole and results have shown good agreement with available experimental data and numerical results. Using this configuration as a baseline, studies continued with three remaining geometries. It was found that for all three geometry variants the cooling effectiveness has considerable increase in comparison to that from the base model. The physical mechanism is primarily due to the weakening of the vortex structures in the vicinity of the hole exit, thus, reducing the penetration depth of the coolant jet flow and the entrainment of surrounding hot fluids.

Keywords: blade cooling effectiveness; hole shape; computational fluid dynamics; CFD; high temperature; turbine blades; service lifetime; cooling hole geometries; simulation; modelling; penetration depth; coolant jet flow; entrainment; hot fluids; vortex structures.

DOI: 10.1504/IJESMS.2010.038144

International Journal of Engineering Systems Modelling and Simulation, 2010 Vol.2 No.4, pp.242 - 248

Published online: 19 Jan 2011 *

Full-text access for editors Full-text access for subscribers Purchase this article Comment on this article