Comparison of performance of three different seeding sludge under three different hyper-thermophilic temperatures
by Isaac Mbir Bryant; Marko Burkhardt; Marion Martienssen
International Journal of Environmental Engineering (IJEE), Vol. 10, No. 1, 2019

Abstract: Performance of three seeding sludge under three different hyper-thermophilic temperatures, 60°C, 65°C and 70°C was investigated and compared with mesophilic (37°C) and thermophilic (55°C) temperatures using the same seeding sludge and substrate in batch tests. Based on German guidelines for batch tests, the seeding sludge were selected for the batch tests using eudiometer tubes. Daily volumes of methane production for the three sludge were measured. Methane yields and degrees of COD degradation of the black water were also calculated and compared. Cow manure at 65°C recorded the highest net normalised cumulative volume of methane content (387.2 mlNCH4-%), methane yield (231.7 mlNCH4/gVS) and degree of COD degradation (79.1%) while BTU at 70°C recorded the least performance of methane yield (0.0 mlNCH4/gVS) and content (0.0 mlNCH4-%) and degree of COD degradation (0.0%). Cow manure at 65°C should be considered when setting-up large-scale hyper-thermophilic digesters.

Online publication date: Mon, 03-Jun-2019

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Environmental Engineering (IJEE):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com