Assessment of welded splices in beam, column and slab
by H.M.A. Mahzuz; Md. Aminul Islam; Saikat Ahmed; Md. Abu Jobair
International Journal of Structural Engineering (IJSTRUCTE), Vol. 9, No. 1, 2018

Abstract: In this study, the performance of welded splices in RCC member is judged with respect to lapped splices having straight bars. The objective of this experiment is to find out a safe weld length for welded splices which can be used in beam, column and slab. For that, 12 mm, 16 mm and 20 mm (fy = 500 MPa and weldable) rebars were used, having an electrode of E60Ksi. Selected bars were welded together with different welding lengths ranging between 25 to 150 mm and conducted tension and bending tests on them. It was found that 100 mm welding was adequate for all bars. So, this length was considered the safe weld length for welded splices. Specimens of beam, column and slab were prepared and tested with welded splices and straight bars. The effects of load on beam, column and slab for both types of bars were observed and found almost same when 100mm welded splices are used.

Online publication date: Tue, 27-Mar-2018

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Structural Engineering (IJSTRUCTE):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com