Analytical modelling of material removal process in the case of orthogonal cutting and worn tools Online publication date: Tue, 02-Jan-2018
by Ferdinando Salvatore; Tarek Mabrouki; Hédi Hamdi
International Journal of Machining and Machinability of Materials (IJMMM), Vol. 19, No. 6, 2017
Abstract: Analytical methods of material removal are usually researched because they are very practical to use, but those methods do not take into account all the aspects of the contact between the work material and the tool. In particular elastoplastic phenomena under the tool are usually not considered, which is pertinent for small cutting edge radius but not for bigger ones (worn tools). In order to take into account all the aspects of the material removal, as chip formation, elastoplastic phenomena under the tool and the spring back at the rear, a 'split approach and composition', is adopted. It is based on the assumption that the material removal is the summation of the cited contributions. The present methodology is applied on orthogonal cutting and is based on thermomechanical computation. All the deformations are concentrated in shear zones, and then it is possible to compute forces, strains and temperatures during tool action, with a good accuracy, compared to experimental results.
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Machining and Machinability of Materials (IJMMM):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook