The effects of post-growth thermal annealing on the structural and electrical properties of RF-magnetron sputtered ZnO
by Ihab Sinno; Ciaran Moore; Gideon Gouws
International Journal of Nanotechnology (IJNT), Vol. 14, No. 1/2/3/4/5/6, 2017

Abstract: The effects of two thermal annealing steps on the crystallographic orientation, film stress and crystal domain size in RF-magnetron sputtered ZnO thin films for ultrasonic transducers were investigated. As-grown films contained high levels of compressive stress introduced by the sputtering process, as well as low (002) crystal orientation selectivity. It was shown that residual stress could be eliminated by post-growth annealing at temperatures of 400°C or higher, however, that annealing process also lead to a reduction in the desired (002) crystal orientation selectivity. The use of the relatively low temperature (250°C) in-situ anneal in the sputtering chamber in an oxygen-rich environment was found essential for prompting grain growth and recrystallisation, resulting in (002) textured ZnO films that have high electrical resistivity.

Online publication date: Fri, 24-Feb-2017

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Nanotechnology (IJNT):
Login with your Inderscience username and password:

Username:        Password:          Forgotten your password?

Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com