Hydraulic fracturing mechanisms in coal: a review Online publication date: Mon, 06-Feb-2017
by Josef Blunschi; John Wang; Turgay Ertekin
International Journal of Oil, Gas and Coal Technology (IJOGCT), Vol. 14, No. 3, 2017
Abstract: Hydraulic fracturing mechanisms in coal differ in many aspects from those in inorganic rocks. Due to the lower Young's modulus and higher Poisson's ratio, the stress state in coal is higher than in adjacent formations. This leads to wider and shorter fractures than in inorganic rocks. Fractures are affected by the cleat system in coal, so that multiple fractures may follow in tortuous paths the coal cleats. Coal often has a fracture treatment pressure in excess of 22.6 kPa/m (1 psi/ft.). Several hydraulic fracturing mechanisms may account for that, namely fracture blocking by coal chips, fracture tip plugging by coal or the development of a complex multi fracture system. The orientation of the hydraulic fractures is predominantly horizontal at shallow depths (< 200 m) and mostly vertical at depths > 600 m. In between these depths, fracture orientation may be either horizontal or vertical. This paper gives a comprehensive overview of the proposed hydraulic fracturing mechanisms in coal. [Received: July 28, 2015; Accepted: January 14, 2016]
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Oil, Gas and Coal Technology (IJOGCT):
Login with your Inderscience username and password:
Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.
If you still need assistance, please email subs@inderscience.com
Our Blog 
Follow us on Twitter 
Visit us on Facebook