Finite element modelling of the low velocity impact response of composite plates with block copolymer nano-reinforcements
by Karthik Ram Ramakrishnan; Sébastien Denneulin; Sandra Guérard; Krishna Shankar; Philippe Viot
International Journal of Automotive Composites (IJAUTOC), Vol. 2, No. 1, 2016

Abstract: The use of composite materials in passive safety structures has increased significantly due to their low specific mass and high energy absorption capacities. The purpose of this study is to develop and validate a macroscopic numerical model to simulate the impact response of composite laminates with nano-reinforcements. The impact resistance of laminate with Kevlar fibre reinforced epoxy resin embedded with Nanostrength®, an acrylate triblock copolymer that self-assembles in the nanometer scale is investigated. Low velocity impact experiments were performed on square plates clamped by means of a circular fixture using an instrumented drop tower. Images of the composite laminate during impact were recorded by a high-speed video camera fixed underneath the plate. An approach for modelling these composites in the commercial finite element code LS-Dyna using constitutive model based on the theory of continuum damage mechanics developed by Matzenmiller, Lubliner and Taylor - called MLT model - is presented. LAMINATED COMPOSITE FABRIC material model, available in the LS-Dyna material model library as (MAT58), was chosen for modelling the low velocity impact of the Kevlar composite plate. The model requires input of material properties in shear, tension, and compression to define stress-strain behaviour within the laminate. The parameters needed for the model are determined using a combination of experimental tests and parametric analysis. The macroscopic response of the Kevlar composite with and without nanoparticles in the resin subjected to impact loading are simulated in LS-Dyna with the phenomenological material model, and is validated by comparison with experiments. It was found that the Kevlar epoxy composite material with Nanostrength M52N had better resistance to perforation compared to the lamiante with neat resin.

Online publication date: Tue, 02-Aug-2016

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Automotive Composites (IJAUTOC):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com