The role of lubricant feed temperature on the performance of twin groove journal bearings: an experimental study
by Francisco P. Brito; António Sousa Miranda; José Carlos Pimenta Claro; Michel Fillon
International Journal of Surface Science and Engineering (IJSURFSE), Vol. 5, No. 4, 2011

Abstract: An experimental assessment of the influence of lubricant feed temperature (Tf) on the behaviour of twin groove hydrodynamic journal bearings has been undertaken. Several loads, shaft speeds and bearing geometries were tested under constant lubricant feed pressure (pf), while Tf took four different values between 29°C and 58°C. It was found that the increase of Tf has an effect in bearing performance which is analogous in many ways to the effect of the increase in eccentricity: increase in lubricant flow rate (especially in the low eccentricity range), in outlet temperature (Tout) and in maximum bush temperature (Tmax). Nevertheless, the latter increase was lower than the corresponding increase in Tf. Also, in the high eccentricity range the increase in flow rate due to the increase of Tf could be deceiving in the sense that the additional flow was supplied mainly to the inactive region of the bearing (the unloaded land of the bearing).

Online publication date: Tue, 14-Oct-2014

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Surface Science and Engineering (IJSURFSE):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com