Design and optimisation of a turning cutter embedded with impact damper
by Donghui Wu; Xi Wang; Yiqing Yang
International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol. 13, No. 3, 2020

Abstract: The cutter with large length-diameter ratio has wide applications in machining structural parts with deep cavity and deep hole features. However, chatter occurs as its declined dynamic stiffness. The impact damper has been utilised to suppress machining vibration due to its simplicity and effectivity. A turning cutter with large length-diameter ratio is designed based on embedded impact damper. The dynamic model is built based on mode superposition method. The influence of cutting force and damping parameters on velocity response status (linear and nonlinear) is analysed. Design parameters of the impact damper are optimised numerically for achieving linear response. Finally, modal tests and machining tests are conducted. The experimental results show that the surface roughness of workpiece (aluminium alloy 7075) is decreased from Ra 1.95 μm to Ra 1.28 μm when the spindle speed n = 500 r/min, feed rate f = 0.05 mm/r, and cutting depth ap = 0.40 mm.

Online publication date: Tue, 17-Nov-2020

The full text of this article is only available to individual subscribers or to users at subscribing institutions.

 
Existing subscribers:
Go to Inderscience Online Journals to access the Full Text of this article.

Pay per view:
If you are not a subscriber and you just want to read the full contents of this article, buy online access here.

Complimentary Subscribers, Editors or Members of the Editorial Board of the International Journal of Mechatronics and Manufacturing Systems (IJMMS):
Login with your Inderscience username and password:

    Username:        Password:         

Forgotten your password?


Want to subscribe?
A subscription gives you complete access to all articles in the current issue, as well as to all articles in the previous three years (where applicable). See our Orders page to subscribe.

If you still need assistance, please email subs@inderscience.com